DIO2 ELISA Kit (Human) (OKCD08295)

Catalog No: OKCD08295

Size:96WELLS

DIO2 ELISA Kit (Human) (OKCD08295) Standard Curve

Product Info

• Predicted Species Reactivity: Human
• Application: Enzyme-linked Immunosorbent assay-Sandwich
• ELISA Kit Detection Method: Colormetric|Regular detection
• ELISA Kit Duration: 3h
• ELISA Kit Principle: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Deiodinase, Iodothyronine, Type II (DIO2). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Deiodinase, Iodothyronine, Type II (DIO2). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Deiodinase, Iodothyronine, Type II (DIO2), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm +/- 10nm. The concentration of Deiodinase, Iodothyronine, Type II (DIO2) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
• ELISA Kit Range: 0.156-10ng/mL
• ELISA Kit Reproducibility: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Deiodinase, Iodothyronine, Type II (DIO2) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Deiodinase, Iodothyronine, Type II (DIO2) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100 Intra-Assay: CV<10% Inter-Assay: CV<12%
• ELISA Kit Component:
  • DIO2 Microplate: 96 Wells (12 x 8 Well strips)
  • DIO2 Lyophilized Standard: 2
  • 100X DIO2 HRP-Detector Anitbody: 1 x 120 uL
  • 100X Avidin-HRP Conjugate: 1 x 120 uL
  • Standard Diluent: 1 x 20 mL
  • Detector Antibody Diluent: 1 x 12 mL
  • Conjugate Diluent: 1 x 12 mL
  • 30X Wash Buffer: 1 x 20 mL
  • TMB Substrate: 1 x 9 mL
  • Stop Solution: 1 x 6 mL
• Reconstitution and Storage: 2°C to 8°C, -20°C
• Sample Type: Tissue homogenates, cell lysates and other biological fluids
• Sensitivity: < 0.057ng/mL

Target Info

• Gene Symbol: DIO2
• Gene Full Name: iodothyronine deiodinase 2
• Alias Symbols: D2, 5DII, SelY, DIOII, TXDI2, SELENOY
• NCBI Gene Id: 1734
• Protein Name: Type II iodothyronine deiodinase
• Description of Target: The protein encoded by this gene belongs to the iodothyronine deiodinase family. It catalyzes the conversion of prohormone thyroxine (3,5,3',5'-tetraiodothyronine, T4) to the bioactive thyroid hormone (3,5,3'-triiodothyronine, T3) by outer ring 5'-deiodination. This gene is widely expressed, including in thyroid, placenta, pituitary and brain. It is thought to be responsible for the 'local' production of T3, and thus important in influencing thyroid hormone action in these tissues. It has also been reported to be highly expressed in thyroids of patients with Graves disease, and in follicular adenomas. The intrathyroidal T4 to T3 conversion by this enzyme may contribute significantly to the relative increase in thyroidal T3 production in these patients. This protein is a selenoprotein containing the rare selenocysteine (Sec) amino acid at its active site, and may contain additional Sec residues. Sec is encoded by the UGA codon, which normally signals translation termination. The 3' UTRs of selenoprotein mRNAs contain a conserved stem-loop structure, designated the Sec insertion sequence (SECIS) element, that is necessary for the recognition of UGA as a Sec codon, rather than as a stop signal. Alternatively spliced transcript variants have been described for this gene.
• Uniprot ID: Q92813
• Protein Accession #: NP_000784.2
• Nucleotide Accession #: NM_000793.5