SBA Clonotyping System-B6/C57J-AP Kit (OKSB00005)

• Product Number: OKSB00005
• Name: SBA Clonotyping System-B6/C57J-AP Kit (OKSB00005)
• Host: Goat
• Clonality: Polyclonal
• Application Kit: Alkaline phosphatase (AP)- based Enzyme- Linked- Immunosorbent- Assay (ELISA)and immunoblotting
  Components: - 1 mL goat anti- mouse Ig capture antibody (2.5 mg/mL)
  - 1 mL AP- labeled goat anti- mouse Ig screening antibody
  - 1 mL AP- labeled goat anti- mouse IgM
  - 1 mL AP- labeled goat anti- mouse IgG1
  - 1 mL AP- labeled goat anti- mouse IgG2c
  - 1 mL AP- labeled goat anti- mouse IgG2b
  - 1 mL AP- labeled goat anti- mouse IgG3
  - 1 mL AP- labeled goat anti- mouse IgA
  - 1 mL AP- labeled goat anti- mouse ?
  - 1 mL AP- labeled goat anti- mouse ?
  - p- nitrophenyl phosphate substrate tablets (20 x 5 mg)
• Reconstitution and Storage: Store at 2-8C
• Storage: - The purified (UNLB) antibody is supplied 100 mM borate buffered saline, pH 8.2. No preservatives or aminecontainingbuffer salts added. Store at 2- 8 C
  - The alkaline phosphatase (AP) conjugates are supplied in a stock solution in 50mM Tris/1mM MgCl2/50%Glycerol, pH 8.0, containing 0.1% NaN3 as preservative. Store at 2- 8 C
  - All system components can be stored for several months at 2- 8 C without appreciable loss of activity. Forlong- term storage, the purified antibody and AP conjugates should be aliquoted undiluted and stores at - 20 C.
• Application Info: Initial screening of fusions and selection of antibody-producing hybridomas from B6/C57J mice, Identification of the heavy and light chain isotypes of antibodies, Selection and isolation of isotype switch variants
• Warning: Reagents contain sodium azide which is very toxic if ingested or inhaled. Avoid contact with skin, eyes, orclothing. Wear eye or face protection when handling. If skin or eye contact occurs, wash with copious amounts ofwater. If ingested or inhaled, contact a physician immediately. Sodium azide yields toxic hydrazoic acid underacidic conditions. Dilute azide- containing compounds in running water before discarding to avoid accumulation ofpotentially explosive deposits in lead or copper plumbing.
• Dilution: ELISA (AP): 1:250-1:500
  Immunoblotting: Since immunoblotting methods vary, you should determine the optimum
  working dilution of the product that is appropriate for your specific need.
• Characterization: To ensure lot- to- lot consistency, each batch of product is tested by ELISA for conformance to characteristics of astandard reference reagent.
• Tested Species Reactivity: Mouse
• Application: ELISA